Electric Paper Trimmer
TM
PowerTrim
Please read these instructions before use.
E
Lire ces instructions avant utilisation.
Lea estas instrucciones antes del usarlo.
F
S
TRIMMER CONTROLS
A
H
E
G
B
F
C
D
QUICK START GUIDE
1
2
3
7
4
8
12”
6
5
9
10
11
3
E
ENGLISH
CAPABILITIES
Performance
Cutting length
Max cutting capacity
Trimming mechanism
PowerSave Auto Shut-off
Technical Data
Main voltage
Frequency
Wattage
Amps
16.5” / 420mm
30 sheets / 20lb
Electric trimming
30min
120V AC
50/60Hz
80 Watts
1.8 Amps Max.
24V DC / 1.8 Amps
Machine rating
Dimensions (WxDxH)
24.5” x 12” x 4.75” / 620 x 300 x 120mm
11lbs / 5 kg
Net weight
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Please read before use and keep for future reference.
Warning - blades are extremely sharp when exposed.
When trimming:
DO ensure the machine is on a stable surface.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave electric cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT exceed the machines quoted performance.
DO plug the machine into an easily accessible socket.
DO test cuts on scrap sheets before trimming final documents.
DO remove staples and other metal articles prior to trimming.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO NOT open or attempt to repair, as this will void your war-
ranty. Contact Customer Service if you have any questions.
DO switch off and unplug PowerTrim when not in use.
PRODUCT REGISTRATION
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from
product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside
of the machine.
NEED HELP?
Let our experts help you with a solution. You’ll find the numbers
for your nearest service center on the back cover of this manual.
Customer Service:
4
TRIMMER CONTROLS
A
B
C
On/off switch (at side)
Cut-Control LED touch pad
SafeCut™ Clamp
E
Overload protection - Paper gauge
Illuminated LED cutting bed
F
G
SafeCut™ Guard (at rear) to protect internal mechanism
- with power breaker (magnetic closure)
D
Carry point
H
Window for paper alignment
FEATURES & TIPS
FEATURES
TIPS
SafeCut™ Guard
Ensures that power supply is stopped when guard
is opened – for service and maintenance.
•
Always clamp paper down with SafeCut™ Clamp before
trimming.
Make sure paper is properly adjusted.
Replace blade unit every 2000 cuts and cutting strip every
500 cuts or when showing signs of wear. Item number for
accessory pack # 54125.
Align cut line with the outer edge of the orange trimline.
For best results, mark the exact cut position on the item
before trimming and try trimming a test sheet.
•
•
SafeCut™ Clamp
Ensures that paper is securely clamped before
trimming – trimmer won’t cut when SafeCut™
Clamp is not closed.
•
Electric trimming
The ultimate trimming solution for safety and
comfort – PowerTrim Electric trimming.
Cut Control function
LED touch pad with Start-Stop function to start
and stop trimming . User can stop trimming if
finished before cycle of 6 cuts has ended.
WORLDWIDE WARRANTY
Fellowes warrants all parts of the trimmer to be free of defects in material and workmanship for 2 years from the date of
purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy
will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of
abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular
purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have
other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except
where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this
warranty, please contact Fellowes or your dealer.
5
BEFORE TRIMMING
1. Ensure the machine is on a stable surface. Check that
there is enough clear space behind the machine to allow
trimmed items to pass through freely.
2. Connect the supplied power lead to the machine.
3. Plug the power lead in to an easily accessible main
socket. Switch the main supply on.
STEPS TO TRIM
9.
4. Switch the power on.
To trim press the Cut-Control LED touch pad. When
touched, the Cut-Control LED will light up in pink and
then turn flashing blue when it is cutting.
5.
Insert document to trim. Use the document gauge at
the sides of the cutting base to check that items do not
exceed maximum capacity.
10. PowerTrim will complete 3 cut cycles (of 6 cuts) for
cutting max 30 sheets (20lb). To stop cutting press the
Cut-Control LED touch pad.
6.
Use transparent window with orange trimline guide to
quickly and accurately align your cuts. Align cut line
with the outer edge of the orange trimline. For best
results, mark the exact cut position on the item before
trimming and try trimming a test sheet.
11. Release clamping mechanism again before removing
items from cutting bed.
7.
Alternatively, align item with the cut dimensions on the
base of the trimmer.
Secure document with SafeCut™ Clamp, the Cut-
Control LED touch pad will light up blue.
8.
6
|